Street Tuner Garage Diorama (Ehra II)

The garage diorama project was completed for less than a month. I started working on it last week of December 2010 and finished the project on second week of January 2011. This project was designed for my 1/24 collection of X-tuner cars (Mistsubishi and Toyota).

The frame and beam of the garage diorama are chopsticks and the walls (corrugated panel) are made up of illustration board. The shutter is a corrugated sheet that is normally available in the bookstore. The mezzanine level is made up of chopstick and popsicle stick as well as the stair.

Some step by step of the execution of the project is made available on the Vol. II of "Talyer Diorama" e-book.


Two bay garage diorama.









































Click here to get a copy of the E-book of this diorama.

5 comments:

  1. Can I have any information for the floor, ladder and roof pls?

    Nice job!

    ReplyDelete
    Replies
    1. the floor is made up of card board from a boxfile, ladder is popsicle stick and the roof is from a big box, download the e-book and you will see how i do it......

      thanks....

      Delete
  2. What did u use as the walls,roof and door

    ReplyDelete
  3. Do u think it is possible to use cardboard as the walls until I get wood

    ReplyDelete
    Replies
    1. I used 20mm card board for the walls and floors.... download the e-books and you will see how I do it.

      Delete